Category: Repairs

5 Tips to Help You Maintain Your Windshield

If you own a car, you may be looking for some useful maintenance tips to avoid costly repairs. After all, you don’t want to end up damaging your vehicle and paying thousands of dollars for repairs. Therefore, in this article, we are going to share 5 tips for your windshield maintenance. Read on.

1. Maintain a Safe Distance from Other Vehicles

While driving at high speeds, make sure you maintain a safe distance from the vehicle ahead. If you drive too close to the car in front of you, chances are that something may bounce off the road and hit your car, especially the windshield.

If this happens, you may have a cracked windshield. If you get it repaired as soon as possible, you won’t need to pay for a windshield replacement.

2. Clean and Replace the Wipers

With regular use, the blades of the wiper get blunt and dirty. It’s important to remove the sand and dirt gathered on the windshield. Also, the wipers should be replaced in a timely fashion so that they don’t damage your windshield by creating scratches.

It’s easy to clean the wipers. All you need to do is soak a piece of rag in wash liquid and use for cleaning.

3. Don’t Leave the Wiper Blades up

In winter, wiper blades tend to fall and hit the screen. Therefore, it’s not a good idea to idea to leave the blades up prior to the ice or snow storm. They should be down at all times, especially in winter. If you don’t follow this tip, you will end up ruining your windshield.

4. Don’t use the Ice Scraper

In winter, another common reason why windshields get damaged is because of people who scrape ice from their house windows. While scraping ice, they tend to get too aggressive and end up hitting the car windshield.

Another common type of damage occurs because of the rubber moldings and trim parts. So, what can you do to be on the safe side? An easy way to prevent the damage is to avoid making use of a snow shovel to remove ice and snow from your car. If you don’t follow this advice, you may end up paying for a replacement.

5. Don’t Use the Wrong Cleaner

Another thing to keep in mind is that the windshield glass should be cleaned manually every couple of weeks. The purpose is to remove the dirt left by the wipers. It’s not a good idea to use cleaners that contain ammonia for this purpose. The reason is that ammonia can cause damage to the glass tint. A safer alternative is to use a window cleaner and use it on the windshield with a cotton towel. This method is safe as it won’t cause scratches or streaks.

In short, these are the 5 tips that you can use in order to maintain your windshield without putting in much effort. Also, these tips will help you avoid common mistakes so that you don’t have to pay for costly windshield repairs.

Why You Need to Replace Cracked Windshields

Driving around with a car that has a cracked windshield is a very risky thing because there are roles that the windshield has to play. There are also laws that each locality puts in place pertaining to what should be done to make sure that everyone is safe as they use the road. A crack in your windshield may look like something small but it is always a very big deal when you come to think of it. When something is small, it has the potential to become bigger and more dangerous.

Driving while the windshield is cracked can obstruct your vision and this can lead to accidents that can cause more damage to the car, harm to others, harm to property, and issues that are law related,

Is it illegal?

If you have a cracked windshield, then you need to have it repaired as soon as possible because in some areas, there are very strict requirements pertaining to the car windshield. To avoid citations and fines, you need to follow the set rules in your locality at all times.

Age of the car

There are some classic and antique cars that are usually sold after manufacture without any windshield. These are the only kinds of cars and motorcycles that can be driven in some areas without any issue. However, any vehicle manufactured after 1936 needs to have gazing material for safety. The windshield should also have functional wipers.

Repairs

If you happen to have a cracked windshield, then you can make use of DIY kits that can assist with the repairs. This happens to be an easier way to get the repairs done and it is simpler. The kits can be bought locally or online.

The issue with such kits that allow you to do it yourself is the fact that they do not give you the highest quality available. This means that things may still go wrong sooner than later. The repairs, therefore, may not be up to the standards that are usually set by the law and you may still need more work eventually.

To avoid this, you should find a professional repair company or specialist. Fixing a windshield should always be handled professionally. As you consider your personal safety, also bear in mind that there are other road users that need consideration. When you lack enough visibility, you pose a danger to yourself and everyone around you. This could lead to serious accidents. Things can be really bad should the windshield come loose as you drive.

The cost of the job done usually depends on your car model and the size of the crack that has to be dealt with. Sometimes, it may be necessary to have the entire windshield replaced and for this, you may have to spend even more money. You should take time to check with the insurance provider regarding whether such repairs are covered or not. In most cases, repairs are not covered by insurance covers.


Evaluating the Material While Considering Investing in an Automatic Conveyor System

Businesspeople, managers and merchants believe that choosing a conveyor such as overhead conveyor systems is a natural process. The hard truth is that selection is not as uncomplicated as some might think. Procurement employees and engineers are invariably faced with challenges and obstacles for moving material. Picking the conveyor can significantly affect the outcome but most often than not the selection is incorrect. The reasons for misapplication can be numerous. Two of them are:

  • A limited amount of unique equipment pieces in the conveyor are used.
  • The budget is maintained.

Considering these factors is critical but it mustn’t become the foundation on which the conveyor is chosen. There are only 6 central elements that are primary to automatic conveyor choice:

  1. Material
  2. Environment
  3. Operation
  4. Cost
  5. History
  6. Footprint

These are the evaluation metrics that should be borne in mind when opting for a conveyor. Out of these six, the material is primary. Thinking over the requirements of material movement will always lead to the conveyor option.

What to Ask Before Buying A Conveyor Belt?

Before selecting the final alternative from food conveyor, there are quite a few characteristics that should be thoroughly cleared. Understanding them in their entirety will help in picking out the equipment that suits your business genuinely. Furthermore, bear in mind that some of the properties depend upon each other. Therefore, it is most appropriate to contemplate the whole picture than just part of it. Start with a blank slate and then answer the following questions:

  • What is the material?

Begin by finding out the type of material that needs to be moved. At times, one element may have many names like trade, esoteric, generic or chemical. The food conveyor manufacturers is relevant because it gives an insight into the main ingredient it is made of which affects the choice. Then look into the form of the medium that you will be handling. The state of the substance can be:

  1. Solid free-flowing
  2. Partly free-flowing

Once you know the state, consider the bulk density of it. This density is defined as the weight of the reduced material per volume when it is free-flowing. Do not factor the specific gravity weight of the substance as that only reflects that substance in its natural form which you will not be handling.

  • What is the size and composition of material?

Knowing the constitution of the substance is necessary. Find out if it is a fibre, pill, pellet, flake, granule or powder. Once the structure and makeup of the substance is apparent, search their particle size. If you are using symmetrical solids, then the scope will be defined as per the screen size they are able to pass. If unsymmetrical solids are utilised, then the geometric dimensions will decide the size.

  • Does the material flow?

The intrinsic tilt angle that occurs when a solid “material is metered from a single point with out vibration or any effort to settle the accumulating mound” is called flowability. Any material that creates a challenge in this area is best sent for review to a conveyor supplier. They can test and then offer the conveyor fit for it.

  • Is the material abrasive?

Any substance that is abrasive will graze and chafe the surface it comes in contact with which in turn will determine the kind of conveyor that has to be employed. In general, plant employees are the highest judge of the abrasiveness of material because there is no standard measurement for it. Through experience, personnel can make educated guesses on how the substance might affect a conveyor belt.

There are 2 other methods to judge the abrasive characteristic of a material:

  1. The hardness of the substance that is defined according to either Vickers or Mohs scale can tell you how rough it will be.
  2. The outline of the particle is the other. A material that is a perfect sphere will have no hard edges and therefore, not scratch the surface. Whereas, material with edges will abrade anything they touch.
  • Does the material have a moisture content?

The moisture level of a material affects the flowability of it. It gives a hint on the cohesiveness of the substance and thus how easy it would be to manage it. The content of moisture is generally calculated as a portion of the total weight. The temperature of the substance should also be factored in at this point.

Answering each of these questions will give you the most robust conveyor type. It will lead to a solution that satisfies your material conveying needs entirely. Additionally, it will guarantee that the purchase you make is worth the investment you put. It is why it is highly recommended to deliberate on all the factors.

The question now is where do you find a conveyor manufacturer who can help with the selection process. The answer lies with us. We, at Alpha Conveyors, take pride in being the provider of all types of automatic conveyors for varying industries. From dry cleaning conveyor systems to food grade conveyors, we offer an exhaustive solution to all needs. We even move beyond being sellers of the latest conveyor systems and offer customisations and modifications.